Version 3.04

This is an assembly with: [LIST] Install. channel MQ-41 3M Bored plate MQZ-L13 Safety stud anchor HST M12X145/50 Channel end cap MQZ-E41 Comfort pipe ring MPN-RC 21/2" B Pipe ring saddle MQA-M8 Gewindestange AM8x1000 4.8 verz. [/LIST]

This is an assembly with: [LIST] Install. channel MQ-41 3M Flush anchor HKD M10x40 Bored plate MQZ-L11 Threaded rod AM10x2000 4.8 zinced Channel end cap MQZ-E41 Hexagon nut M10 zinced Flat washer A 10,5/28 zinced Comfort pipe ring MPN-RC 3" B Pipe ring saddle MQA-M10 Threaded rod AM10x1000 4.8 zinced [/LIST]

This is an assembly with: [LIST] Install. channel MQ-41 3M Install. channel MQ-41 D 3M Rail support MQP-21-72 4-hole angle MQW-4 Channel connector MQN Safety stud anchor HST M12X115/20 Channel end cap MQZ-E41 Comfort pipe ring MPN-RC 3" B Pipe ring saddle MQA-M10 Hexagon nut M10 zinced Threaded rod AM10x1000 4.8 zinced [/LIST]

This is an assembly with: [LIST] Install. channel MQ-41 3M Install. channel MQ-41 3M Rail support MQP-21-72 4-hole angle MQW-4 Channel connector MQN Safety stud anchor HST M12X115/20 Channel end cap MQZ-E41 Threaded rod AM10x1000 4.8 zinced Comfort pipe ring MPN-RC 3" B Pipe ring saddle MQA-M10 Hexagon nut M10 zinced Threaded rod AM10x1000 4.8 zinced [/LIST]

Pladur® Twin Frame, Split Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm + thickness of interior board). Both structures are formed by Pladur® Studs (vertical elements) and PLADUR® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Mixed Partition Solutions, formed by two Independent Pladur® wall lining systems both braced to each side of a supporting wall (defined in the project). The mixed partition set’s final thickness will depend on the supporting wall finally defined. Each wall lining system is formed by a structure of galvanised steel sheet profiles, based on Studs (vertical elements) and Tracks (horizontal elements); on the internal side and depending on the free available height, the studs must be braced using angles that fix in place the core of the studs and the supporting wall, leaving a minimum distance of 10 mm between the structure and the wall. One or more Pladur® boards are then screwed to the external side of each wall lining structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes,

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Lightweight Facade And Lift Shaft Solution, formed by a structure of 90-mm wide and 0.7-mm thick galvanised steel sheet profiles, based on Pladur® CH-90 Studs and Pladur® E-90 Studs (vertical elements), with a 600-mm separation between axes and Pladur® J-92 Tracks (horizontal elements); one face of the partition is created toward the inaccessible side (shaft area) by fitting in a 25-mm thick Pladur® CH board with start and end E-90 studs and CH-90 modulation studs, laying between both materials continuous strings of Pladur® Acoustic Intumescent Sealant. One or more 15-mm thick Pladur® FOC boards are screwed to the traversable side of this partition. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Lightweight Facade And Lift Shaft Solution, formed by a structure of 90-mm wide and 0.7-mm thick galvanised steel sheet profiles, based on Pladur® CH-90 Studs and Pladur® E-90 Studs (vertical elements), with a 600-mm separation between axes and Pladur® J-92 Tracks (horizontal elements); one face of the partition is created toward the inaccessible side (shaft area) by fitting in a 25-mm thick Pladur® CH board with start and end E-90 studs and CH-90 modulation studs, laying between both materials continuous strings of Pladur® Acoustic Intumescent Sealant. One or more 15-mm thick Pladur® FOC boards are screwed to the traversable side of this partition. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4

Pladur® Mixed Partition Solutions, formed by two Independent Pladur® wall lining systems both braced to each side of a supporting wall (defined in the project). The mixed partition set’s final thickness will depend on the supporting wall finally defined. Each wall lining system is formed by a structure of galvanised steel sheet profiles, based on Studs (vertical elements) and Tracks (horizontal elements); on the internal side and depending on the free available height, the studs must be braced using angles that fix in place the core of the studs and the supporting wall, leaving a minimum distance of 10 mm between the structure and the wall. One or more Pladur® boards are then screwed to the external side of each wall lining structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes,

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Split Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm + thickness of interior board). Both structures are formed by Pladur® Studs (vertical elements) and PLADUR® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

The Duo 15Z is a 2 part split frame which is suitable for almost all wall types. Your advatages: [LIST] The connection is not visible, visual effect of a 1 part frame Suitable for standard openings = standard door leaves (see DIN measurement table) With patented levelling anchor (DE 19900095.6-25) Can be installed together with the door in finished rooms Many standard sizes available from stock at short notice [/LIST] Searches: 2 part split frame non adjustable / two part split frame non adjustable 2 part split frame / two part split frame 15Z painted hardwood frame frame steel frame powder coated frame wrap around frame aluminium frame lead lined frame hardwood frame