#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, acer campestris tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Quercus Petrae / Sessile Oak tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, beach umbrella with\- variable number of parts\- rounded or square shape base

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D rounded flower pot with bench

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Taxodium Distichum / Bald Cypress tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D rounded flower pot

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D rounded flower pot

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Fagus Sylvatica / European / Common Beech tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Pinus Pinea / Stone Pine

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D swing

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D pergola with\n- variable number of pillars\n- variable number of purlins

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D slide with wood stand and ladder

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D arbor frame with\n- variable number of pillars \n- variable slope angle\n- variable number of purlins

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D horse statue with pedestal, top view

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric traffic light with support\n- red, orange, green optinal: on / off

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Fraxinus Ornus / Manna Ash / South European Flowering Ash tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, billboard with optional pictures / ads

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D hammock

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, bus stop with\n- variable numbers of back panels\n - optional bus stop name

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, bus stop with\n- barrel roof\n- variable number of back panels\n - optional bus stop name

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, bus stop with\n- variable number of back panels\n - optional bus stop name

Design: Bønnelycke MDD 2001 http://www.bonnelycke.com Forhandler: http://www.silo-dk.com (#200-1)Stolmodul3D parametric, Bonnelycke Stol, sofa add-on part

3D parametric, rotator, with optional\n- name of library part to rotate\n- rotate about "X", "Y", "Z" axis (+ or -)

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D statue / bust with pedestal, top view

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D litter bin

3D parametric, HAG Sideways back

3D parametric, HAG Sideways seat

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, abies alba pine tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Aesculus Hippocastanus tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Alnus Cordata pine

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Betula Pendula / Silver Birch tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Larix Decidua, European Larch pine tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Morus Nigra / Black mulberry tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Picea Abies / Norway Spruce pine

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Pinus Pinaster / Maritime Pine tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Platanus Acerifolia / London / Hybrid Plane tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Populus Nigra / Black Poplar tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Prunus Avium / Wild Cherry tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Quercus Farnetto / Hungarian / Italian Oak tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Quercus Ilex / Holm / Holly Oak tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Robinia Pseudo-Acacia / Black Locust tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Taxus Bacata / European Yew tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com2D / 3D billboard, Ulmus Carpinifolis / Field Elm tree

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, posts / bollards with\n- optional distance between elements\n- variable diameter of elements\n- optional slope angle

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, large posts / bollards with\n- optional distance between elements\n- variable diameter of elements\n- optional slope angle

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, posts / bollards with\n- optional distance between elements\n- variable diameter of elements\n- optional slope angle

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, bus stop with\n- barrel roof\n- variable number of back panels\n - optional bus stop name

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D octagonal bench

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D bench with concrete frame

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D simple bench with concrete frame

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D wood bench

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D wood bench with metal frame

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D wood fence

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D litter bin

Rex folding lounge chair, the REX lounge chair is part of the REX collection. Designer Niko Kralj (Rex), http://rex-kralj.si

A completely parametric object with 7 main trusses. It is part of the 3DMD Aluminum Truss Library, a library of aluminum truss objects. The object is inspired by the brands Milos and Litec, so you can find a similar preset dimensions for each object. You can, however, customize the dimensions of every object to match your favorite brand. The Outline option helps you to simplify the visualization in both 2D and 3D. Download a PDF about this product http://www.3dmediadesign.it/objects/3DMD_Al_Truss_Library.pdf Watch a video about this product http://youtu.be/uC_w124TakU

A completely parametric object with 3 main trusses. It is part of the 3DMD Aluminum Truss Library, a library of aluminum truss objects. The object is inspired by the brands Milos and Litec, so you can find a similar preset dimensions for each object. You can, however, customize the dimensions of every object to match your favorite brand. The Outline option helps you to simplify the visualization in both 2D and 3D. Download a PDF about this product http://www.3dmediadesign.it/objects/3DMD_Al_Truss_Library.pdf Watch a video about this product http://youtu.be/uC_w124TakU Download a PDF about this product http://www.3dmediadesign.it/objects/3DMD_Al_Truss_Library.pdf Watch a video about this product http://youtu.be/uC_w124TakU

Rex folding chair, the REX chair is part of the REX collection. Designer Niko Kralj (Rex), http://rex-kralj.si

Rex folding daybed is part of the REX collection. Designer Niko Kralj (Rex), http://rex-kralj.si

PURUS miniMAX has low profile and a special designed water trap with NOOD function with top access. Even if the drain dries out, no foul air comes up through the drain, because the spring-loaded trap keeps itself closed. The water trap is easily removed by pulling up with the automatically raised handle. The miniMAX works as an outlet without the water trap. PURUS miniMax Two Part is for wetroom former trays. Includes a 50mm to 1½” push fit to solvent weld ABS adapter.

PURUS miniMAX has low profile and a special designed water trap with NOOD function with top access. Even if the drain dries out, no foul air comes up through the drain, because the spring-loaded trap keeps itself closed. The water trap is easily removed by pulling up with the automatically raised handle. The miniMAX works as an outlet without the water trap. PURUS miniMax Two Part is for wetroom former trays. Includes a 50mm to 1½” push fit to solvent weld ABS adapter.

SLOT DRAIN CHANNEL SETUP is used to drain water off durable surfaces such as pavements, driveways and parking areas. This type of slot drain is for high and low traffic areas including personal application. The 100 mm inner diameter of the channel is fully sufficient for any rainwater drainage off the given durable surface. The manufacturing technology is unique; the whole slot drain is produced by a vibropress machine. Thanks to that, we can lower our price significantly, unlike rival products.

SLOT DRAIN CHANNEL SETUP is used to drain water off durable surfaces such as pavements, driveways and parking areas. This type of slot drain is for high and low traffic areas including personal application. The 100 mm inner diameter of the channel is fully sufficient for any rainwater drainage off the given durable surface. The manufacturing technology is unique; the whole slot drain is produced by a vibropress machine. Thanks to that, we can lower our price significantly, unlike rival products.

A completely parametric object with 43 corners. It is part of the 3DMD Aluminum Truss Library, a library of aluminum truss objects. The object is inspired by the brands Milos and Litec, so you can find a similar preset dimensions for each object. You can, however, customize the dimensions of every object to match your favorite brand. The Outline option helps you to simplify the visualization in both 2D and 3D. Download a PDF about this product http://www.3dmediadesign.it/objects/3DMD_Al_Truss_Library.pdf Watch a video about this product http://youtu.be/uC_w124TakU

A completely parametric object with 38 crosses. It is part of the 3DMD Aluminum Truss Library, a library of aluminum truss objects. The object is inspired by the brands Milos and Litec, so you can find a similar preset dimensions for each object. You can, however, customize the dimensions of every object to match your favorite brand. The Outline option helps you to simplify the visualization in both 2D and 3D. Download a PDF about this product http://www.3dmediadesign.it/objects/3DMD_Al_Truss_Library.pdf Watch a video about this product http://youtu.be/uC_w124TakU

Rex rocking folding lounge chair, the REX lounge chair is part of the REX collection. Designer Niko Kralj (Rex), http://rex-kralj.si

Rex folding table, part of the REX collection. Designer Niko Kralj (Rex), http://rex-kralj.si

This stool made by the genius Niko Kralj is just one in a long line of such sophisticated and ingeniously designed products. Conceived way back in 1954, the stool remains a concept of elegance. It is distinguished by clean lines and a minimalistic appearance, which, however, does not mean that it is visually boring, but quite the opposite. Due to its cross type construction, which in a unique way connects the remaining elements of the stool, it appears that the upper part of the stool floats effortlessly above the legs. Perfectly connected wood from a technical point of view, aided with the help of only one screw, lends itself to creating a stable and comfortable stool.

The Planet chair and table was first launched in 1965 and remained a part of the collection until the end of the 1970s. Planet was the first spherical chair in Norwegian furniture history. The name alludes to the first space journey in 1961 and the entry of Pop Art furniture onto the Norwegian market. Delivered with plastic gliders. Planet may be turned 360 degrees, and is available with a soft tilt- forwards/backwards. We recommend choosing an elastic material such as Divina, Fame, Vadal and Cicero. There is an additional charge if you choose more than one fabric/colour per chair. The model is delivered with removable seat cover. The highest textile group form the basis for pricing.Planet is available in white contrast seam (NCS S 0500-N), light grey (NSC S 2502-R), grey (NCS S 5502-B) and black (NSC S 9000-N)

[LIST] Thermally insulated sliding and lift-and-slide system Thermal insulation in accordance with DIN EN ISO 10077, Part 1, Uw values of 1.9 W/(m²K), and a unit size of 2,500 mm x 2,500 mm, double glazing with a Ug value of 1.1 W/(m²K) Vent sizes: maximum width 3,000 mm maximum height 3,000 mm Vent weight up to 400 kg Watertightness up to class 9A in accordance with DIN EN 12208 Burglar resistance up to class RC 2 (WK2) Wide choice due to single, double and triple track outer frames [/LIST]

Quadrature® 2 ultra-flat single luminaire for suspended mounting | with ELDACON®, direct/indirect distribution, CAT2(L≤ 1000cd/m²) | with ECG | visible frame of anodised extruded aluminium, brushed vertical sides, highly specular underside; upper housing part of sheet steel, metallic grey (RAL 9006)

Koja Sofa Low is a sofa with a protective shell of ash wood. An upholstered upper part and down-filled cushions make the high Koja a perfect place to relax. Koja is suitable for hotel lobbys, lounge areas and libraries, among many other locations. Koja also comes in a high version and is also available as easy-chair with high and low backrest. Design: Fredrik Mattson.

Luca Nichetto was inspired by the architecture in the 1950s when he took on the task of producing a product for the O2ASIS project. In the 1950s, vegetation was an integral part of architecture. As Luca began the development work he put a number of flower

Mobi's partitions are covered in Fabric Runner from Gabriel and are available in a dynamic range of colours and in two standard heights; 1000 and 1600 mm, depending on the desired amount of privacy. The width of the screen is 1510 mm. The length of the table top is 1400 mm. The table top width is 600 mm on the narrowest part. The widest part of the table is 900 mm. The height of the table is 710 mm. The table is made from white laminate MDF board (RAL 9016). There is a discrete cable opening on the table top edge. Design: Andrea Ruggiero.

The series Studio is a system of seating furniture, designed by UNStudio, which can be adapted to any need or environment. The series is a part of Offecct´s business area Travel & Navigation together with many products that are suitable for different ki

Green Pedestals is a piece of furniture for greenery and vegetation designed by Front. Green Pedestals is part of Offecct’s O2ASIS project which is an assortment of design products, that combined with vegetation enhances and adds value to the work environ

House - Toilet Roll Holder in Polished Chrome. Concealed fastening. Combining an angular mounting plate contrasting to the soft curves of each functional part. The core material is solid brass, finished in brushed or polished chrome.

L25 table in compression-moulded birch veneer with a surface of ash veneer. Integral tray in lacquered aluminium. The L25 table is part of the B25 family, created to celebrate that Blå Station turned 25 years young in 2011, and Cate & Nelson were commissioned to design a product to commemorate the occasion – B25. Their brief was to base this product on the language of design that characterised Blå Station in its earliest days – the round birch-wood ring and natural tanned leather from Tärnsjö Tannery. The result, B25, also builds on the idea of furnishings as members of a family. The allusions to Börge Lindau’s Oblado series are unmistakable. We first manufactured the iconic round ring in birch in 1986 – and the very same tool has now been used for B25. The B25 family also includes an easy chair and an ottoman. The table is ideal in, for example, lounges and lobbies. Design: Cate & Nelson.

The chair Cape by Japanese design studio Nendo was presented as an experiment in Offecct Lab 2013 but is from 2014 a part of the Offecct collection. This chair was created by covering a strong, light metal pipe frame with a wooden seat and a wooden back

Koja Low is an easy chair with a protective shell of ash wood. An upholstered upper part and down-filled cushions make Koja a perfect place to relax. Koja is suitable for hotel lobbys, lounge areas and libraries, among many other locations. Koja also comes in a high version and is also available as a sofa with high and low backrest. Design: Fredrik Mattson.

House - Quadruple Towel Hook in Polished Chrome. Concealed fastening. Length 178 mm. Combining an angular mounting plate contrasting to the soft curves of each functional part. The core material is solid brass, finished in brushed or polished chrome.

Green Pedestals is a piece of furniture for greenery and vegetation designed by Front. Green Pedestals is part of Offecct’s O2ASIS project which is an assortment of design products, that combined with vegetation enhances and adds value to the work environ

The series Studio is a system of seating furniture, designed by UNStudio, which can be adapted to any need or environment. The series is a part of Offecct´s business area Travel & Navigation together with many products that are suitable for different ki

Cables, cables and yet more cables. Whether we like it or not, they are part of our everyday life. However, perhaps we can hide these dull cables as well as possible by adding even more cables? That was what WIS Design had in mind when they created the Hi

Green Islands can be described as an ottoman with room for vegetation, and by integrating a higher plant inside Green Islands, a relaxing feeling of sitting as under a tree is created. The key is that the vegetation is part of the furniture. Green Islands

House - Double Towel Hook in Polished Chrome. Concealed fastening. Combining an angular mounting plate contrasting to the soft curves of each functional part. The core material is solid brass, finished in brushed or polished chrome.

Green Pedestals is a piece of furniture for greenery and vegetation designed by Front. Green Pedestals is part of Offecct’s O2ASIS project which is an assortment of design products, that combined with vegetation enhances and adds value to the work environ

Fellow is a personal piece of furniture that can be formed and shaped individually, changing appearance and characteristics accordingly. Create your own Fellow by selecting different fabrics or leather for different sections. Fellow thrives in locations like hotel lobbys and lounge areas. Fellow is also available without armrests and can be connected to become a sofa. When nearly all sofas and armchairs are covered with one of the company´s chosen materials, Fellow offers you the opportunity to choose and cover your armchair or sofa with whatever meets your tastes and needs. Perhaps a more conservative choice for a business man in a meeting on Wall Street? Or, why not something colourful for fun loving people in a hotel lobby? The only limits are your creativity. Be part of the result! Each Fellow section can be covered in 1 to 3 different colours/fabrics. Maximum one colour per part; front of seat, middle part incl. armrests and backrest. Design: Fredrik Mattson.

Green Pedestals is a piece of furniture for greenery and vegetation designed by Front. Green Pedestals is part of Offecct’s O2ASIS project which is an assortment of design products, that combined with vegetation enhances and adds value to the work environ

Koja Sofa High is a sofa with a protective shell of ash wood. An upholstered upper part and down-filled cushions make the high Koja a perfect place to relax or seclude yourself from the noisy surroundings. Koja is suitable for hotel lobbys, lounge areas and libraries, among many other locations. Koja also comes in a low version and is also available as easy-chair with high and low backrest. Design: Fredrik Mattson.

Ocean is a small table that has been designed to make our Ocean bench into an item of multifunctional furniture. A table that can function as a finish or as an intermediate part for the bench. Ocean can also be used as a versatile little sideboard in many different contexts. Available in natural lacquer, oil or stain. Design: Swedish Ninja/Maria Gustavsson.

The series Studio is a system of seating furniture, designed by UNStudio, which can be adapted to any need or environment. The series is a part of Offecct´s business area Travel & Navigation together with many products that are suitable for different ki

House - Towel Hook in Polished Chrome. Concealed fastening. Pair. Combining an angular mounting plate contrasting to the soft curves of each functional part. The core material is solid brass, finished in brushed or polished chrome. Similar product is also available under Home series HK3455.

Koja High is an easy chair with a protective shell of ash wood. An upholstered upper part and down-filled cushions make the high Koja a perfect place to relax or seclude yourself from the noisy surroundings. Koja is suitable for hotel lobbys, lounge areas and libraries, among many other locations. Koja also comes in a low version and is also available as a sofa with high and low backrest. Design: Fredrik Mattson.

Green Islands can be described as an ottoman with room for vegetation, and by integrating a higher plant inside Green Islands, a relaxing feeling of sitting as under a tree is created. The key is that the vegetation is part of the furniture. Green Islands

The manufacturing of this functional and durable chair is part of Offecct’s collaboration with the organisation ECONEF, who works towards developing a much needed orphanage in northern Tanzania, Africa. – The chair Kali was designed with a somewhat low t

Pladur® Sound Conditioning Solution. Pladur® FON+, Suspended Ceiling formed by a simple or double (primary and secondary) structure of galvanised steel sheet profiles, based on Pladur® T-60 Profiles, properly suspended from the ceiling structure with Pladur® hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. Pladur® FON+ Boards are then screwed to the simple or secondary structure. Proportional part of the Pladur® materials: screws, compounds, joint tapes, resilient tape, etc, totally finished with a Level 3 (Q3) Quality Finish. Mineral Wool may also be used (without vapour barrier or Kraft paper) on the reverse side of the boards and profiles. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Ceiling, formed by a structure of galvanised steel sheet profiles, based on Pladur® Furring Channels anchored directly to the base wall, with one or more Pladur® boards screwed to the external side. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Split Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm + thickness of interior board). Both structures are formed by Pladur® Studs (vertical elements) and PLADUR® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Sound Conditioning Solution. Pladur® FON+, Suspended Ceiling formed by a simple or double (primary and secondary) structure of galvanised steel sheet profiles, based on Pladur® T-60 Profiles, properly suspended from the ceiling structure with Pladur® hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. Pladur® FON+ Boards are then screwed to the simple or secondary structure. Proportional part of the Pladur® materials: screws, compounds, joint tapes, resilient tape, etc, totally finished with a Level 3 (Q3) Quality Finish. Mineral Wool may also be used (without vapour barrier or Kraft paper) on the reverse side of the boards and profiles. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Wall Lining, formed by a structure of galvanised steel sheet profiles formed by Pladur® Furring Channels attached directly to the base wall, with one or more PLADUR® boards screwed to the wall’s external face. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape, etc. totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Mixed Partition Solutions, formed by two Independent Pladur® wall lining systems both braced to each side of a supporting wall (defined in the project). The mixed partition set’s final thickness will depend on the supporting wall finally defined. Each wall lining system is formed by a structure of galvanised steel sheet profiles, based on Studs (vertical elements) and Tracks (horizontal elements); on the internal side and depending on the free available height, the studs must be braced using angles that fix in place the core of the studs and the supporting wall, leaving a minimum distance of 10 mm between the structure and the wall. One or more Pladur® boards are then screwed to the external side of each wall lining structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes,

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Lightweight Facade And Lift Shaft Solution, formed by a structure of 90-mm wide and 0.7-mm thick galvanised steel sheet profiles, based on Pladur® CH-90 Studs and Pladur® E-90 Studs (vertical elements), with a 600-mm separation between axes and Pladur® J-92 Tracks (horizontal elements); one face of the partition is created toward the inaccessible side (shaft area) by fitting in a 25-mm thick Pladur® CH board with start and end E-90 studs and CH-90 modulation studs, laying between both materials continuous strings of Pladur® Acoustic Intumescent Sealant. One or more 15-mm thick Pladur® FOC boards are screwed to the traversable side of this partition. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Single Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm). Both structures are formed by Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Wall Lining, formed by a structure of galvanised steel sheet profiles formed by Pladur® Furring Channels attached directly to the base wall, with one or more PLADUR® boards screwed to the wall’s external face. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape, etc. totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Lightweight Facade And Lift Shaft Solution, formed by a structure of 90-mm wide and 0.7-mm thick galvanised steel sheet profiles, based on Pladur® CH-90 Studs and Pladur® E-90 Studs (vertical elements), with a 600-mm separation between axes and Pladur® J-92 Tracks (horizontal elements); one face of the partition is created toward the inaccessible side (shaft area) by fitting in a 25-mm thick Pladur® CH board with start and end E-90 studs and CH-90 modulation studs, laying between both materials continuous strings of Pladur® Acoustic Intumescent Sealant. One or more 15-mm thick Pladur® FOC boards are screwed to the traversable side of this partition. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4

Pladur® Suspended Single Frame Ceiling, Suspended Ceiling formed by a structure of galvanised steel sheets based on Pladur® T-47, T-60, TF Profiles or Studs, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more PLADUR® boards are then screwed to this structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc. totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Mixed Partition Solutions, formed by two Independent Pladur® wall lining systems both braced to each side of a supporting wall (defined in the project). The mixed partition set’s final thickness will depend on the supporting wall finally defined. Each wall lining system is formed by a structure of galvanised steel sheet profiles, based on Studs (vertical elements) and Tracks (horizontal elements); on the internal side and depending on the free available height, the studs must be braced using angles that fix in place the core of the studs and the supporting wall, leaving a minimum distance of 10 mm between the structure and the wall. One or more Pladur® boards are then screwed to the external side of each wall lining structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes,

Pladur® Direct Bond Wall Lining, formed by a Pladur® board attached directly to the supporting wall using clumps of Pladur® Bonding Compound laid every 400 mm in both directions. Proportional part of the Pladur® materials: compound, joint tape, bonding compound, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Suspended Twin Frame Ceiling, formed by a double structure (primary and secondary) of galvanised steel sheet profiles, based on Pladur® PH-45, GL, T-47 or T-60 profiles, properly suspended from the ceiling structure with Pladur® Hangers + Ø 6 mm threaded rod, and supported by Pladur® Profiles mechanically attached all along the perimeter. One or more Pladur® boards are then screwed to the secondary structure. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient tape, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Direct Bond Wall Lining, formed by a Pladur® board attached directly to the supporting wall using clumps of Pladur® Bonding Compound laid every 400 mm in both directions. Proportional part of the Pladur® materials: compound, joint tape, bonding compound, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Twin Frame, Split Cavity Partitions, formed by two Pladur® boards screwed to each side of a galvanised steel double structure (free or braced) and separated by a variable distance from each other (minimum separation of 10 mm + thickness of interior board). Both structures are formed by Pladur® Studs (vertical elements) and PLADUR® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Single Frame Partitions, formed by one or more Pladur® boards screwed to each side of the galvanised steel structure, based on Pladur® Studs (vertical elements) and Pladur® Tracks (horizontal elements). Proportional part of the Pladur® materials: screws, compound, joint tape, resilient/acoustic tape in the perimeter, etc, as well as anchor bolts for tracks on floor and ceiling, etc, totally finished with a Level 1 (Q1) Quality Finish for tiled finishes, laminated finishes with strips, etc, or Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Pladur® structure core totally filled with Mineral Wool. Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Pladur® Semi-Direct Ceiling, formed by a structure of galvanised steel sheet profiles, based on Pladur® Furring Channels anchored directly to the base wall, with one or more Pladur® boards screwed to the external side. Proportional part of the Pladur® materials: screws, compound, joint tape, resilient, etc, totally finished with a Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4) Quality Finish, depending on surface finish requirements (defined in the project). Assembly according to Pladur® recommendations, Standard UNE 102043 and CTE requirements.

Mobi's partitions are covered in Fabric Runner from Gabriel and are available in a dynamic range of colours and in two standard heights; 1000 and 1600 mm, depending on the desired amount of privacy. The width of the screen is 1510 mm. The length of the table top is 1400 mm. The table top width is 600 mm on the narrowest part. The widest part of the table is 900 mm. The height of the table is 710 mm. The table is made from white laminate MDF board (RAL 9016). There is a discrete cable opening on the table top edge. Design: Andrea Ruggiero.

Siphonic urinal LAUFEN LEMA, sanitary ceramic, electronic controlled, DIN 1390, EN 13407, dimensions 350 x 400 x 700 mm, min. 0,5-l flushing automatic adjusted independent of rupply pressure, ceramic siphon cover, water inlet concealed 1/2“, outlet horizontal, flushing, rate minimum 0,2 l/s HF electronic control for battery (6x AA 1,5 V), pre-assembled, siphon replaceable without dismantling urinal, lid under, urinal, waste piping cleaning without dismantling urinal, Special feature: Vacuum and performance tested, 1-litre siphon, waste, connection pipe DN 50 (standard Europe, except CH and UK) and pipe, DN 40 (standard CH), chromed strain, Further options / accessories: Surface refinement LCC (only white), with fly, 1-liter spare part siphon Order no. 84019.4

Siphonic urinal LAUFEN ANTERO, sanitary ceramic DIN 1390, EN 13407, dimensions 380 x 365 x 770 mm min. 0,5-l flush, ceramic siphon cover, water inlet concealed 1/2“, outlet horizontal, flushing rate minimum 0,3 l/s siphon replaceable without dismantling urinal, Special feature: Vacuum and performance tested, 1-litre siphon, waste connection pipe DN 50 (standard Europe, except CH and UK) and pipe DN 40 (standard CH) Further options / accessories: Surface refinement LCC (only white), with fly, 1-liter spare part siphon Order no. 84015.3

Waterless urinal LAUFEN LEMA, sanitary ceramic, DIN 1390, dimensions 350 x 400 x 700 mm, ceramic siphon cover, outlet horizontal, no chemical and electricity needed, no mechanical parts, siphon replaceable, without dismantling urinal, odour stone included in siphon, Special feature: Vacuum and performance tested, 0-litre siphon, waste, connection pipe DN 50 (standard Europe, except CH and UK) and pipe, DN 40 (standard CH), Further options / accessories: Surface refinement LCC (only white), with fly, 0-liter spare part siphon Order no. 84319.5

Siphonic urinal LAUFEN ANTERO, sanitary ceramic, electronic controlled, DIN 1390, EN 13407, dimensions 380 x 365 x 770 mm min. 0,5-l flushing automatic adjusted independent of rupply pressure, ceramic siphon cover, water inlet concealed 1/2“, outlet horizontal, flushing rate minimum 0,2 l/s HF electronic control for battery (6x AA 1,5 V) pre-assembled, siphon replaceable without dismantling urinal, lid under urinal, waste piping cleaning without dismantling urinal Special feature: Vacuum and performance tested, 1-litre siphon, waste connection pipe DN 50 (standard Europe, except CH and UK) and pipe DN 40 (standard CH) Further options / accessories: Surface refinement LCC (only white), with fly, 1-liter spare part siphon Order no. 840150

Siphonic urinal LAUFEN ANTERO, sanitary ceramic, electronic controlled, DIN 1390, EN 13407, dimensions 380 x 365 x 770 mm min. 0,5-l flushing automatic adjusted independent of rupply pressure, ceramic siphon cover, water inlet concealed 1/2“, outlet horizontal, flushing rate minimum 0,2 l/s, HF electronic control 230 V pre-assembled, concealed power supply, siphon replaceable without dismantling urinal, lid under urinal, waste piping cleaning without dismantling urinal Special feature: Vacuum and performance tested, 1-litre siphon, waste connection pipe DN 50 (standard Europe, except CH and UK) and pipe DN 40 (standard CH) Further options / accessories: Surface refinement LCC (only white), with fly, 1-liter spare part siphon Order no. 84015.4

Siphonic urinal LAUFEN ANTERO, sanitary ceramic, electronic controlled, DIN 1390, EN 13407, dimensions 380 x 365 x 770 mm min. 0,5-l flushing automatic adjusted independent of rupply pressure, ceramic siphon cover, water inlet concealed 1/2“, outlet horizontal, flushing rate minimum 0,2 l/s, HF electronic control 230 V pre-assembled, concealed power supply, siphon replaceable without dismantling urinal, lid under urinal, waste piping cleaning without dismantling urinal Special feature: Vacuum and performance tested, 1-litre siphon, waste connection pipe DN 50 (standard Europe, except CH and UK) and pipe DN 40 (standard CH) Further options / accessories: Surface refinement LCC (only white), with fly, 1-liter spare part siphon Order no. 84015.6

Siphonic urinal LAUFEN ANTERO, sanitary ceramic, electronic controlled, DIN 1390, EN 13407, dimensions 380 x 365 x 770 mm min. 0,5-l flushing automatic adjusted independent of rupply pressure, ceramic siphon cover, water inlet concealed 1/2“, outlet horizontal, flushing rate minimum 0,2 l/s, HF electronic control 230 V pre-assembled, siphon replaceable without dismantling urinal, lid under urinal, waste piping cleaning without dismantling urinal Special feature: Vacuum and performance tested, 1-litre siphon, waste connection pipe DN 50 (standard Europe, except CH and UK) and pipe DN 40 (standard CH) Further options / accessories: Surface refinement LCC (only white), with fly, 1-liter spare part siphon Order no. 84015.5

Siphonic urinal LAUFEN LEMA, sanitary ceramic, DIN 1390, EN 13407, dimensions 350 x 400 x 700 mm, min. 0,5-l flush, ceramic siphon cover, water inlet concealed 1/2“, outlet, horizontal, flushing rate minimum 0,3 l/s, siphon replaceable without dismantling urinal, Special feature: Vacuum and performance tested, 1-litre siphon, waste, connection pipe DN 50 (standard Europe, except CH and UK) and pipe, DN 40 (standard CH), Further options / accessories: Surface refinement LCC (only white), with fly, 1-liter spare part siphon Order no. 84019.7

Moisture resistant melamine cabinet is a part of Gaius bath solution. Edge trim of laminate doors are made of beech and also frame edges have beech strips to facilitate visualization. Cabinet handrail forms complete railing with basin handrail. Railings are also available with elastomeric coating. Cabinet is designed for storage of the main products required in the bathroom: in the bottom pull-out laundry basket supported on easy to use rails, in the middle is box for small items and on the top is spacious storage cabinet with adjustable shelves. At the lowest level is the place for wall sockets. Upper shelves have space to keep toilet rolls, towels or diapers. There are hooks for towels on the outside of the cabinet and the inside of the door.

The powerful high-insulating lining in combination with an insulating air gap prevents the need to switch off when you pass a floor, and you can under certain circumstances build the chimney directly to the wall. You have the ability to influence the appearance of the chimney. In the basement and the attic you can, for convenience, leave the chimney breast untreated. A chimney stretching through several floors, you can paint to make it fit into the environment. The part that is visible above the roof, you can either polish, dress in with sheet metal or brick. Connection to the fireplace can be done anytime and anywhere along the chimney, it allows you to build your chimney and fireplace choose afterwards. Courtesy by rakennustieto Finland. These downloadable objects are only available in Finnish at the moment.

PUNTA VKZ wardrobes suitable changing rooms where you want to save space, and a slightly narrower space is sufficient. Every customer has access to a high part of the example, a jacket or a bat,wide part and other goods. Courtesy by rakennustieto Finland. These downloadable objects are only available in Finnish at the moment.

The windows in this range are frameless, and when they are installed they become an integral part of the structure, with only the pane itself splitting up the wall. The deep casing allows for a broad range of glazing options. The tightness and soundproofing characteristics of these windows meet the requirements of even the most demanding environments. The solid-wood casing provides effective thermal insulation. Material options include narrow-grained northern pine, larch, and oak.

Corner shower with fixed sliding glass doors. The lock magnet (supplied) attach the curved doors firmly to each other. The water flow can be prevented by installing an integral part of the product under all or part of the seal base (included).

The windows in this range are frameless, and when they are installed they become an integral part of the structure, with only the pane itself splitting up the wall. The deep casing allows for a broad range of glazing options. The tightness and soundproofing characteristics of these windows meet the requirements of even the most demanding environments. The solid-wood casing provides effective thermal insulation. Material options include narrow-grained northern pine, larch, and oak.

Simplicity by design is the principle behind Sticks 3000 created by schmidt hammer lassen. The lines of the grey-enamelled aluminium housing are continued in single or double light slots in opalised plastic. At daylight, Sticks is simply part of the envir

Simplicity by design is the principle behind Sticks 900 created by schmidt hammer lassen. The lines of the black or grey-enamelled aluminium housing are continued in single or double light slots in opalised plastic. At daylight, Sticks is simply part of t

When the door opens, moves approximately. 90 mm outwards from the casing before it is displaced in parallel over the fixed part of the element. The fixed part of the element should always be at least as wide as the cutting part. When closed, there is no l

This BIM object is produced in conjunction with Laattapiste - Lyra Plus the toilet seat rectilinear clear and timeless design is Finland's Antti Ylisassin handwriting. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are across the board, including the inside of the pipes, glazed and therefore hygienic. Seat height 43 cm is more modern ergonomic requirements. The toilet seat is also water-saving dual flush. Manufactured by Jika is part of the Roca Group, one of the world's leading manufacturer of sanitary ware.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

The lighting system of the DELI family comprises pendant and built-in light fixtures that may be used singly or may be connected to direct lines or sets of various shapes thanks to the accessories. Due to to their subtle dimensions, minimalist elegance and variability the DELI lights easily become an inseparable part of an interior. They may be broadly used in representative and social areas, shops or cultural amenities. Type of installation: [LIST] Recessed Surface Wall mounted Suspended [/LIST]

This BIM object is produced in conjunction with Laattapiste - Lyra Plus the toilet seat rectilinear clear and timeless design is Finland's Antti Ylisassin handwriting. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are across the board, including the inside of the pipes, glazed and therefore hygienic. Seat height 43 cm is more modern ergonomic requirements. The toilet seat is also water-saving dual flush. Manufactured by Jika is part of the Roca Group, one of the world's leading manufacturer of sanitary ware.

Retro wall caps form yet another alternative for sheltering the top part of your wall. Water is drained by a drip ledge wall cap.

The lighting system of the DELI family comprises pendant and built-in light fixtures that may be used singly or may be connected to direct lines or sets of various shapes thanks to the accessories. Due to to their subtle dimensions, minimalist elegance and variability the DELI lights easily become an inseparable part of an interior. They may be broadly used in representative and social areas, shops or cultural amenities. Type of installation: [LIST] Recessed [/LIST]

This BIM object is produced in conjunction with Laattapiste - Lyra Plus the toilet seat rectilinear clear and timeless design is Finland's Antti Ylisassin handwriting. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are across the board, including the inside of the pipes, glazed and therefore hygienic. Seat height 43 cm is more modern ergonomic requirements. The toilet seat is also water-saving dual flush. Manufactured by Jika is part of the Roca Group, one of the world's leading manufacturer of sanitary ware.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus the toilet seat rectilinear clear and timeless design is Finland's Antti Ylisassin handwriting. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are across the board, including the inside of the pipes, glazed and therefore hygienic. Seat height 43 cm is more modern ergonomic requirements. The toilet seat is also water-saving dual flush. Manufactured by Jika is part of the Roca Group, one of the world's leading manufacturer of sanitary ware.

Retro cinder blocks are used for wall footings, posts and brickwork that form a part of landscaping architecture.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

This BIM object is produced in conjunction with Laattapiste - Lyra Plus toilet seat has clear and timeless design by Finnish designer Antti Ylisassi. Lyra Plus combines a high quality at a reasonable price and the value for money at its best. The toilet seats are glazed throughout, including the inside of the pipes, and therefore hygienic. Seat height 43 cm corresponds to modern ergonomic requirements. Toilet seats also have water-saving dual flush. Manufacturer Jika is part of the Roca Group, one of the world's leading manufacturers of sanitary ceramics.

Double acting door frames are suitable for use in brick and stud walls. Your advantages: [LIST] With special hinges also suitable for all-glass doors The door can be opened in both directions Provision for a rolling latch possible For German standard doors, double acting door hinges are included in delivery [/LIST] Searches: 2 part split frame adjustable / two part split frame adjustable 2 part split frame / two part split frame painted hardwood frame frame steel frame powder coated frame wrap around frame aluminium frame lead lined frame hardwood frame

asepticDOOR: The anti-bacterial door system. Four partners – one solution Steel frame - BOS Best Of Steel Door handle - HÄFELE Door leaf - JELD-WEN Door surface - RESOPAL® + HIPERCARE® Verifiable: [LIST] good anti-bacterial effect on all surfaces cleaning and disinfectant compatibility surfaces can be cleaned quickly and easily advisable for hospital hygiene and infection prevention [/LIST] Searches: 2 part split frame non adjustable / two part split frame non adjustable 2 part split frame / two part split frame 15Z painted hardwood frame frame steel frame powder coated frame wrap around frame aluminium frame lead lined frame hardwood frame aseptic

The Duo 15Z is a 2 part split frame which is suitable for almost all wall types. Your advatages: [LIST] The connection is not visible, visual effect of a 1 part frame Suitable for standard openings = standard door leaves (see DIN measurement table) With patented levelling anchor (DE 19900095.6-25) Can be installed together with the door in finished rooms Many standard sizes available from stock at short notice [/LIST] Searches: 2 part split frame non adjustable / two part split frame non adjustable 2 part split frame / two part split frame 15Z painted hardwood frame frame steel frame powder coated frame wrap around frame aluminium frame lead lined frame hardwood frame

Part numbers: BG0800C & BG0800CS Swing up grab bar with toilet roll holder hook, manufactured by Mediclinics in aisi 304 stainless steel bar Ø 32 mm and 1,5 mm thick. Mediclinics offers these products for the purpose of improving the quality of life of people with reduced mobility. State of the art design, high durability and easy to maintain. The process used for bending the grab bars guarantees uniformity in the diameter of its curves. Built using AISI 304 stainless steel with a bright or a satin finish. The rotating point of this grab bar is strengthened with a double tube for a maximum resistance. A safety system that blocks the bar in the vertical position prevents its accidental dropping. Stainless steel screws and plastic plugs to install the grab bar to the wall are provided.

Part numbers: E05AC & E05ACS Saniflow® automatic hand dryers with stainless steel cover is the rotating nozzle hand dryer that is most widely used in the world, regardless of the location to be fitted. These machines also feature easy maintenance, low noise levels and a high level of user safety. Together with an accurate design of components, SANIFLOW dryers boast the most powerful airflow in the world, which, combined with a comfortable drying temperature, reduces drying times to a minimum. Available in a 1,5 mm. thick stainless steel cover bright or satin finished is ideal for Heavy traffic Bathrooms. Thus, these are proven models with a long durability and complete reliability, with anti-vandalism features and designed to be installed in high traffic of people such as airports, large hotels, sport centres, large recreational areas and large official organizations, among others.

Part numbers: DT2106 Paper towel dispenser, designed and manufactured by Mediclinics, made in steel 0.8 mm. thick, white Epoxy finished. These models are suitable for C/Z folded paper towels; in this category, products are available that allow amounts ranging between 400 and 600 towels. They are designed to be installed in any type of public washroom. Models for a more efficient use of the paper and suitable for different washroom environments: gymnasiums, sports centres, hospitals and health centres, hotels and similar type installations; solutions even for use in different places. All these paper tower dispensers are supplied with a front lock to provide easy access for paper replenishment and an special key for opening. These dispensers are especially designed so that the paper can be easily replaced. Also, most models of this brand include anti-vandalism features and incorporate mechanisms to facilitate and optimize the use of paper.

Part numbers: DT0303C & DT0303CS Mediclinics paper towel roll dispensers are designed to be installed in any type of public washrooms. They use paper towell rolls maximum diameter of 250 mm. Paper towel dispensers are made IN stainless steel AISI 304 and in two different finishes: bright & satin. They have been thought for a more efficient paper use and suitable for different washroom environments: gymnasiums, sports centers, hospitals and health centers, hotels and similar type of installations. All these models have a front sliding door, especially designed for an easy paper replacement. They have anti-vandal features and designed to facilitate and optimize the rational use of the paper, such as for example the toothed paper outlet that facilitates the paper cutting. These Mediclinics paper tower roll dispensers are supplied with a lock and special key for opening and screws for the installation to the wall.

Part numbers: M02AC-UL & M02ACS-UL With important success, SANIFLOW has developed THE FIRST INTELLIGENT HAND DRYER thanks to a new hand drying system called “Logic Dry”, which selects fully automatically for each drying cycle the heating-capacity required for optimal airflow temperature, representing an advance in the design and features of hand dryers for public washrooms. Additionally, they are equipped with new electronic and anti-vandalism protection systems, which make them the most secure dryers of their category. These Serie boast the legendary SANFILOW airflow – over 315 CFM per hour plus fully automatic operation, precision design and efficiency, reducing the noise level to the minimum of the market on its category. Available in AISI 304 stainless steel, 1,5 mm thick, bright or satin finish, it represents a stylish choice.

Part numbers: M09A-UL & M09AB-UL Designed to dry quickly, the Machflow® high speed hand dryer, combines a very powerful airflow with low usage. So fast and so efficient that is really a break-through for the industry. You will love this blower. The cover of this hand dryers is manufactured in steel, 1.5 mm thick and finished in white or black Epoxy. This new vandal-resistant modern dryer incorporates a low energy, high pressure motor that produces high velocity airflow capable of drying hands in as little as 10-15 seconds, drawing a min of 450 watts instead of the usual 2.300 Watts. With a maximum speed of 203 mph is probably the fastest & most efficient hand dryer in the industry. The dryer is very easy to install, utilizing Universal voltage (from 110 to 240 V) that adjusts automatically, perfect for older buildings & contributing to its energy efficiency. Machflow dryer can also be turned down for quieter operation, ideal for public libraries & campus facilities. In summary , a very reliable HIGH SPEED dryer.

Part numbers: BR0300, BR0400, BR0600, BR0750, BR0900 & BR1200 Grab bar manufactured by Mediclinics in steel bar Ø 32 mm, 1,5 mm thick, white Epoxy finished and with a white plastic snap flange cover for hidden mounting. State of the art design, high durability and easy to maintain. The process used for bending the grab bars guarantees uniformity in the diameter of its curves. Stainless steel screws and plastic plugs to install the grab bar to the wall are provided.

Part numbers: DT0106 Paper towel dispenser, designed and manufactured by Mediclinics, made in steel 0.8 mm. thick, white Epoxy finished. These dispensers are designed to be installed in any type of public washroom. Models for a more efficient use of the paper and suitable for different washroom environments: gymnasiums, sports centres, hospitals and health centres, hotels and similar type installations; solutions even for use in different places. Models suitable for C/Z folded paper towels; in this category, products are available that allow amounts ranging between 400 and 600 towels. All Mediclinics paper tower dispensers are supplied with a lock and special key for opening and screws. These dispensers are especially designed so that the paper can be easily replaced. Also, most models of this brand include anti-vandalism features and incorporate mechanisms to facilitate and optimize the use of paper.

Part numbers: M14A-UL, M14ACS-UL & M14AB-UL The dualflow© Plus M14 is a fast, energy efficient, ecologic, hygienic & stylish hand dryer. It uses a high speed Class A universal motor to create an air stream of 233 mph that will dry your hands in ten seconds only. It’s elegant, easy maintenance designed and friendly-use. It’s very respectful with the environment thanks to its low power consumption (350 W in the ECO mode). The dualflow©plus is much more hygienic than alternatives owing to its 3-layer HEPA filter H13 and the Biocote© technology. The HEPA filter captures more than 99% of allergens in the air by filtering the air through a 30 mm thick 3 coat filter. The filter blocks at least 99.95% of particles than are 0.3 micron in size. The inclusion of the Biocote© technology inhibits the growth of the microrganisms odour causing and staining, keeping the unit clean and hygienic at all times. The dualflow©plus M14 provides a premium experience in every aspect. Very fast in drying terms (10-15 seconds), very quiet (only 62 dBA on the ECO setting) and respectful with the environment. It can be considered a truly money saver hand dryer owing its unique features that allows it to achieve savings of more than 57% compared to other “hands-in” dryers on the market. The dualflow©plus M14 is certified form third party by the North American Laboratory Underwriters Laboratories (UL) according with the USA Safety standard UL 499 and with the Canadian Standard CSA C22.2.

Part numbers: M09AC & M09ACS The line of Machflow® stainless steel sensor operated hand dryers provides important energy savings and an ultra-fast drying. Solutions with an avant-garde design and with two different finishes so that the dryers can easily blend in with the decoration. Its main advantages include: - energy savings (1.9 Watts per drying cycle) - ultra-fast drying time. Dries hands in record speed, between 8 and 12 seconds) - caring for the environment. The Machflow® family consumes an average of 237 Kg of CO2, which represents a 53% annual carbon print reduction) - minimum noise pollution (between 68 and 75 dB) The cover of this hand dryers is manufactured in stainless steel AISI 304, 1.5 mm thick and it is available in two finishes (bright and satin). With a maximum air speed of 325 Km/h, the Machflow Mediclinics’ hand dryers stands out in the fast drying sector, while complying with the most important international quality and safety certifications; its anti-vandalism features make it suitable for use at facilities with a high traffic of people.

Part numbers: M04A, M04AC & M04ACS The economic line of Smartflow® hand dryers is one of the most compact in the market, designed for locations that because of their size require small sized washroom accessories that meet two requirements: low consumption and optimum hand drying. These units are automatic dryers that offer an optimum relationship between functionality and price. Because of its features and design, this economic line is intended to be installed in areas with a large trafic of people like for example medium sized restaurants, cafeterias or the offices of a small or medium sized company. Three models with different finishes are available: white, bright and satin. All of them with an ABS resistant cover and electronic detection sensor by infrared beam with adjustable distance detection, that allows a better adaptability to different types of washrooms. These dryers also provide maximum safety, with a safety thermal cut off installed in the motor and another one in the dryer’s heating element.

Part numbers: E88A, E88AB, E88AC, E88ACS & E88AO Saniflow® automatic hand dryers with steel cover is the rotating nozzle hand dryer that is most widely used in the world, regardless of the location to be fitted. These machines also feature easy maintenance, low noise levels and a high level of user safety. Together with an accurate design of components, SANIFLOW dryers boast the most powerful airflow in the world, which, combined with a comfortable drying temperature, reduces drying times to a minimum. Available in a 1,5 mm. thick steel cover white, black, bright chrome, satin chome or gold plated finished is ideal for Heavy traffic Bathrooms. Thus, these are proven models with a long durability and complete reliability, with anti-vandalism features and designed to be installed in high traffic of people such as airports, large hotels, sport centres, large recreational areas and large official organizations, among others.

Part number: M88APLUS Mediclinics Juniorplus sensor operated hand dryers have been designed for those washroom environments that require an excellent value for money. Equipped with a one piece ABS resistant cover it has been designed for medium/small washrooms. Includes an electronic detection system that uses an infrared beam, which is an adjustable mechanism that allows better adaptability to different types of washrooms. These dryers are also characterised for offering an optimum relationship between performance and consumption; incorporating an induction motor that allows free maintenance. They are ideal to be installed in washrooms with an average traffic of people like for example, restaurants, theatres, offices, etc. These dryers also provide maximum safety, with a safety thermal cut off installed in the motor and another one in the dryer’s heating element.

Part numbers: PR0789 These models are designed and manufactured by Mediclinics in steel 0.8 mm thick and they are available in white epoxy finish. They have been thought to be used in restaurants, offices, hospitals, etc. and provide value added to the design. All of these are capable of holding 3 standard toilet paper rolls or a Ø275mm industrial paper roll. The 3 standard toilet paper rolls option, includes an automatic mechanism, based in a revolvering mechanism, which causes the next roll to drop once the bottom roll has been used. Ø275mm industrial paper roll option has an axis with anti-spin brake by inertia, to ensure a more rational use of the paper. With anti-vandalism features, all of these include a special key for opening the casing.

Part numbers: M06AC & M06ACS The Speedflow® line of hand dryers is categorized within the eco-fast range of product. With a total power of 1150 W, it consumes an average of 3.83 W per drying cycle, which achieves an energy savings greater than 80% with respect to traditional hand dryers. about carbon foot print the Speedflow line consumes an average of 247 Kg of CO2, which represents a 51% annual reduction in emissions. Manually adjustable high speed motor that allows controlling the noise and the speed, which allows the hand dryer to adapt to any type of washroom environment. Heating element can be switch off by means of a jumper placed on the electronic control. Highly durable compact units with anti-vandalism features it is available AISI 304 stainless steel and in two different types of finishes: bright or satin. Low noise pollution, with a noise level between 64 and 74 dBA. Air outlet speed between 90 and 180 Km/h, achieving a fast drying time between 10 and 12 seconds. Maximum drying safety with automatic disconnect after 60 seconds of continued use. In conclusion, Speedflow® is an eco-efficient hand dryer because minimizes energy consumption and CO2 emissions that is especially recommended for public washrooms with a high traffic of people; and thanks to its design and width (ultrathin), it is compliant with ADA/USA standards.

Part numbers: PP0006C & PP0006CS The wall mounted sanitary napkin container with lid manufactured by Mediclinics has a capacity of 6 L and it is available in stainless steel AISI 304 bright or satin finish. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece. The lid protudes 3.5 mm from the body to facilitate the opening and it is fastened to the body by two shafts that they allows its rotation. It can be either free-standing or wall-mounted.

Part numbers: PR0783C & PR0783CS Toilet roll paper dispenser Ø 230 mm, manufactured by Mediclinics in stainless steel AISI 304, 0.8 mm thick, to be installed directly on the wall. Mediclinics toilet paper dispensers provide a solution for heavy duty paper rolls. The product line is designed to equip any public washroom, offering different products that adapt to the different needs of the washroom that is to be equipped. These models are designed for high traffic washrooms that experience a large influx of people. The solutions provided by this category are available in two different finishes: bright AISI 304 stainless steel and satin AISI 304 stainless steel. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece and they have a Mediclinics standard safety lock with a key, which is provided with the product. Also, all of them incorporate a slot on the front of the model to allow viewing the amount of paper remaining and they have an AISI 304 stainless steel axis with inertia brake to optimize the dispensing of the paper.

Part numbers: BG0800 Swing up grab bar with toilet roll holder hook, manufactured by Mediclinics in steel bar Ø 32 mm and 1,5 mm thick. Mediclinics offers these products for the purpose of improving the quality of life of people with reduced mobility. State of the art design, high durability and easy to maintain. The process used for bending the grab bars guarantees uniformity in the diameter of its curves. Built using steel white epoxy finished. The rotating point of this grab bar is strengthened with a double tube for a maximum resistance. A safety system that blocks the bar in the vertical position prevents its accidental dropping. Stainless steel screws and plastic plugs to install the grab bar to the wall are provided.

Part numbers: SN0027C, SN0031C, SN0036C, SN0027CS, SN0031CS & SN0036CS Recessed round wash basins, manufactured in stainless steel AISI 304, 1.2mm thick, in bright or satin finish, that makes a perfect blend of style and functionality and providing them a great endurance, as well. Basins are circular, presenting different sizes (Ø 265/305 mm, Ø 315/355 mm or Ø 355/405 mm) to suit specific needs of requirements of our customers. They have a waste hole of Ø 50 mm and they are prepared with or without water overflow hole. These wash basins are very easy to install, clean and maintain.

Part numbers: E05C & E05CS Saniflow® manual hand dryers with stainless steel cover is the rotating nozzle hand dryer that is most widely used in the world, regardless of the location to be fitted. These machines also feature easy maintenance, low noise levels and a high level of user safety. Together with an accurate design of components, SANIFLOW dryers boast the most powerful airflow in the world, which, combined with a comfortable drying temperature, reduces drying times to a minimum. Available in a 1,5 mm. thick stainless steel cover bright or satin finished is ideal for Heavy traffic Bathrooms. Thus, these are proven models with a long durability and complete reliability, with anti-vandalism features and designed to be installed in high traffic of people such as airports, large hotels, sport centres, large recreational areas and large official organizations, among others.

Part numbers: DJ0031, DJ0031C & DJ0031CS Hand-operated liquid soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304 0.8 mm thick, to be installed directly on the wall. Available in three finishes (white, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly. With a net weight of 1.25 Kg these soap dispensers have an inner plastic tank that prevents oxidation and that can be easily removed for cleaning and disinfection purposes. This entire range of soap dispensers is equipped with an anti-drip corrosion resistant valve that dispenses 1.5 ml of soap per service. This anti-drip valve is easily interchangeable with the valves of the other soap dispensers of the same line, so you can easily turn this liquid soap dispenser into a foam or spray soap dispenser. In addition, these soap dispensers have a soap content level display in the front part that constantly indicates the level of soap available inside the soap dispenser. It is recommended to use liquid soaps or disinfectant gel soaps with a density between 0.9 and 1.35 kg/dm3 and a maximum viscosity of 3,000 cps.

Part numbers: PR2784 Double standard roll toilet paper dispensers, 2 rolls capacity, made in steel 0.8 mm. thick, wall mounted, designed and manufactured by Mediclinics®, S.A. These models are designed to be used in restaurants, offices, hospitals, etc., presenting a suitable design for a simple bathroom integration. Body made in a single piece, these roll toilet paper dispensers are available in white Epoxy® finish. These roll toilet paper dispensers models have a functional, robust and trendy design that matches the new range of Mediclinics® bathroom accessories. This allows this roll toilet paper dispenser to blend into any space perfectly. In addition, these roll toilet paper dispensers have two level displays in both sides of the body that constantly indicates the level of the paper available and show when it is necessary to replace the paper roll. With a capacity of two standard rolls, these roll toilet paper dispenser models include an automatic mechanism, which causes the next roll to drop once the bottom roll has been used. It is a plastic bracket for the reserve paper roll that can be regulated in two different positions, depending on the dimensions of the paper roll and that allows the free movement of the roll in use. The paper roll drops when the previous has been consumed, through a simple manipulation by the level displays at the side.

Part numbers: E05A & E05AB Saniflow® automatic hand dryers with steel cover is the rotating nozzle hand dryer that is most widely used in the world, regardless of the location to be fitted. These machines also feature easy maintenance, low noise levels and a high level of user safety. Together with an accurate design of components, SANIFLOW dryers boast the most powerful airflow in the world, which, combined with a comfortable drying temperature, reduces drying times to a minimum. Available in a 1,5 mm. thick steel cover white or black finished is ideal for Heavy traffic Bathrooms. Thus, these are proven models with a long durability and complete reliability, with anti-vandalism features and designed to be installed in high traffic of people such as airports, large hotels, sport centres, large recreational areas and large official organizations, among others.

Part numbers: M88PLUS Mediclinics Juniorplus push button operated hand dryers have been designed for those washroom environments that require an excellent value for money. Equipped with a one piece ABS resistant cover, with a modern design. They are suitable for medium/small washrooms. They include an electronic timer with a 45 second cycle that it is activated by means of a push-button. These dryers are also characterised for offering an optimum relationship between performance and consumption; incorporating an induction motor that allows free maintenance. They are ideal to be installed in washrooms with an average traffic of people like for example, restaurants, theatres, offices, etc. These dryers also provide maximum safety, with a safety thermal cut off installed in the motor and another one in the dryer’s heating element.

Part numbers: DJ0040, DJ0040C & DJ0040CS Soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304, to be installed directly on the wall and hand-operated through a push-button made in stainless steel. Available in three finishes (white, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly. With a net weight of 1.2 Kg and manufactured in stainless steel AISI 304, 0.8 mm thick, these soap dispensers have an inner plastic tank that prevents oxidation and that can be easily removed for cleaning and disinfection purposes. This entire range of soap dispensers is equipped with an anti-drip corrosion resistant valve that dispenses 0.8 ml of soap per service. This valve is easily removable from the plastic tank for maintenance purposes. In addition, these soap dispensers have a soap content level display in the front part that constantly indicates the level of soap available inside the soap dispenser. It is recommended to use liquid soaps with neutral pH and chlorides free.

Part numbers: M14A, M14ACS & M14AB The dualflow© Plus M14 is a fast, energy efficient, ecologic, hygienic & stylish hand dryer. It uses a high speed Class F universal motor to create an air stream of 410km/h that will dry your hands in ten seconds only. It’s elegant, easy maintenance designed and friendly-use. It’s very respectful with the environment thanks to its low power consumption (350 W in the ECO mode). The dualflow©plus is much more hygienic than alternatives owing to its 3-layer HEPA filter H13 and the Biocote© technology. The HEPA filter captures more than 99% of allergens in the air by filtering the air through a 30 mm thick 3 coat filter. The filter blocks at least 99.95% of particles than are 0.3 micron in size. The inclusion of the Biocote© technology inhibits the growth of the microrganisms odour causing and staining, keeping the unit clean and hygienic at all times. The M14 provides a premium experience in every aspect. Very fast in drying terms (10-15 seconds), very quiet (only 62 dBA on the ECO setting) and respectful with the environment. It can be considered a truly money saver hand dryer owing its unique features that allows it to achieve savings of more than 73% compared to other “hands-in” dryers on the market. The dualflow©plus M14 is certified from third party by the German Laboratory VDE according with the European Safety standards EN60335-1 & EN60335-2-23 and with the European Electromagnetic Compatibility and repealing Directive 89/336/EEC.

Part numbers: PP0065C, PP0065CS, PP0080C & PP0080CS The Mediclinics’ waste bins with spring–loaded lid models are designed for high traffic washrooms that experience a large influx of people and they are manufactured in AISI 304 stainless steel in two different capacities: 65 and 80 litters. They are a perfect solution for gymnasiums, sports centers, hospitals, health centers and similar type of installations. The solutions provided by this category are available in two different finishes: bright and satin. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece and can be either free-standing or wall-mounted. These waste bins have a manually activated self-closing lid. The opening lid mechanism is formed by an spring for automatic return and two rubber silencers to minimize the effect of the lid closing impact. They have a retaining system on the inside to secure the waste plastic bag and four black thermoplastic feet to keep the bottom of the bin clear of any moisture.

Part numbers: E88-UL, E88B-UL, E88C-UL, E88CS-UL & E88O-UL SANIFLOW® PUSH BUTTON operated hand dryers are premium quality heavy-duty dryers with excellent performance and life, provided with a ten years limited warranty. These machines also feature easy maintenance, low noise levels and a high level of user safety. Together with an accurate design of components, SANIFLOW dryers boast the most powerful airflow in the world, which, combined with a comfortable drying temperature, reduces drying times to a minimum. Available in steel cover white, black, bright, satin or gold finished. Ideal for Heavy traffic Bathrooms.

Part numbers: M06AC-UL & M06ACS-UL The Speedflow® line of hand dryers is categorized within the eco-fast range of product. With a total power of 1150 W, it consumes an average of 3.83 W per drying cycle, which achieves an energy savings greater than 80% with respect to traditional hand dryers. about carbon foot print the Speedflow line consumes an average of 247 Kg of CO2, which represents a 51% annual reduction in emissions. Manually adjustable high speed motor that allows controlling the noise and the speed, which allows the hand dryer to adapt to any type of washroom environment. Heating element can be switch off by means of a jumper placed on the electronic control. Highly durable compact units with anti-vandalism features it is available AISI 304 stainless steel and in two different types of finishes: bright or satin. Low noise pollution, with a noise level between 64 and 74 dBA. Air outlet speed between 56 and 110 mph, achieving a fast drying time between 10 and 12 seconds. Maximum drying safety with automatic disconnect after 60 seconds of continued use. In conclusion, Speedflow® is an eco-efficient hand dryer because minimizes energy consumption and CO2 emissions that is especially recommended for public washrooms with a high traffic of people; and thanks to its design and width (ultrathin), it is compliant with ADA/USA standards.

Part numbers: M03AC & M03ACS Mediflow® stainless steel hand dryer models are characterised by their power and ruggedness. Automatically operated compact solutions, which thanks to its two product options, are better suited for any type of washroom environment. Mediflow® Basic line are made according to the highest quality and safety standards. It includes a safety thermal limiter, automatic disconnect system, safety screws and special wrench type opener. The cover of these hand dryers is made in AISI 304 stainless steel, 1.5 thick and available in bright finish or in AISI 304 stainless steel satin finish. It represents a stylish choice. Also, Mediclinics offers the possibility of incorporating items to the entire Mediflow® product line such as the flush mounting kit, galvanized metal cabinet for installing the hand dryer, which allows complying with the ADA/UNE standard for eliminating architectural barriers in washrooms. In summary, Mediflow® solutions are proven long lasting and completely reliable models. Versatile hand dryers with anti-vandalism features and designed to be installed in areas with a large traffic of people such as: airports, large hotels, sports centres, large recreational areas and official organizations among others.

Part numbers: M06A & M06AB The Speedflow® line of hand dryers is categorized within the eco-fast range of product. With a total power of 1150 W, it consumes an average of 3.83 W per drying cycle, which achieves an energy savings greater than 80% with respect to traditional hand dryers. about carbon foot print the Speedflow line consumes an average of 247 Kg of CO2, which represents a 51% annual reduction in emissions. Manually adjustable high speed motor that allows controlling the noise and the speed, which allows the hand dryer to adapt to any type of washroom environment. Heating element can be switch off by means of a jumper placed on the electronic control. Highly durable compact units with anti-vandalism features it is available steel and in two different types of finishes: white or black. Low noise pollution, with a noise level between 64 and 74 dBA. Air outlet speed between 90 and 180 Km/h, achieving a fast drying time between 10 and 12 seconds. Maximum drying safety with automatic disconnect after 60 seconds of continued use. In conclusion, Speedflow® is an eco-efficient hand dryer because minimizes energy consumption and CO2 emissions that is especially recommended for public washrooms with a high traffic of people; and thanks to its design and width (ultrathin), it is compliant with ADA/USA standards.

Part numbers: PR0787C & PR0787CS Toilet roll paper dispenser Ø 275 mm, manufactured by Mediclinics in stainless steel AISI 304, 0.8 mm thick, to be installed directly on the wall. Mediclinics toilet paper dispensers provide a solution for heavy duty paper rolls. The product line is designed to equip any public washroom, offering different products that adapt to the different needs of the washroom that is to be equipped. These models are designed for high traffic washrooms that experience a large influx of people. The solutions provided by this category are available in two different finishes: bright AISI 304 stainless steel and satin AISI 304 stainless steel. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece and they have a Mediclinics standard safety lock with a key, which is provided with the product. Also, all of them incorporate a slot on the front of the model to allow viewing the amount of paper remaining and they have an AISI 304 stainless steel axis with inertia brake to optimize the dispensing of the paper.

Part numbers: DJS0033, DJS0033C & DJS0033CS Hand-operated spray soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304 0.8 mm thick, to be installed directly on the wall. Available in three finishes (white, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly. With a net weight of 1.25 Kg these soap dispensers have an inner plastic tank that prevents oxidation and that can be easily removed for cleaning and disinfection purposes. This entire range of soap dispensers is equipped with an anti-drip corrosion resistant valve that dispenses 0.8 ml of soap per service. This anti-drip valve is easily interchangeable with the valves of the other soap dispensers of the same line. In addition, these soap dispensers have a soap content level display in the front part that constantly indicates the level of soap available inside the soap dispenser. It is recommended to use spray soaps with a maximum density of 0.8 kg/dm3 and a maximum of alcohol content of 85 %.

Part numbers: PP0065 & PP0080 The Mediclinics’ waste bins with spring–loaded lid models are designed for high traffic washrooms that experience a large influx of people and they are manufactured in steel in two different capacities: 65 and 80 litters. They are a perfect solution for gymnasiums, sports centers, hospitals, health centers and similar type of installations. The solutions provided by this category are available in steel white Epoxy finished. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece and can be either free-standing or wall-mounted. These waste bins have a manually activated self-closing lid. The opening lid mechanism is formed by an spring for automatic return and two rubber silencers to minimize the effect of the lid closing impact. They have a retaining system on the inside to secure the waste plastic bag and four black thermoplastic feet to keep the bottom of the bin clear of any moisture.

Part numbers: DT0106C & DT0106CS Paper towel dispenser, designed and manufactured by Mediclinics, made in AISI 404 stainless steel 0.8 mm. thick, bright or satin finished. These dispensers are designed to be installed in any type of public washroom. Models for a more efficient use of the paper and suitable for different washroom environments: gymnasiums, sports centres, hospitals and health centres, hotels and similar type installations; solutions even for use in different places. Models suitable for C/Z folded paper towels; in this category, products are available that allow amounts ranging between 400 and 600 towels. All Mediclinics paper tower dispensers are supplied with a lock and special key for opening and screws. These dispensers are especially designed so that the paper can be easily replaced. Also, most models of this brand include anti-vandalism features and incorporate mechanisms to facilitate and optimize the use of paper.

Part numbers: M09AC-UL & M09ACS-UL Designed to dry quickly, the Machflow® high speed hand dryer, combines a very powerful airflow with low usage. So fast and so efficient that is really a break-through for the industry. You will love this blower. The cover of this hand dryers is manufactured in stainless steel AISI 304, 1.5 mm thick and it is available in two finishes (bright and satin). This new vandal-resistant modern dryer incorporates a low energy, high pressure motor that produces high velocity airflow capable of drying hands in as little as 10-15 seconds, drawing a min of 450 watts instead of the usual 2.300 Watts. With a maximum speed of 203 mph is probably the fastest & most efficient hand dryer in the industry. The dryer is very easy to install, utilizing Universal voltage (from 110 to 240 V) that adjusts automatically, perfect for older buildings & contributing to its energy efficiency. Machflow dryer can also be turned down for quieter operation, ideal for public libraries & campus facilities. In summary , a very reliable HIGH SPEED dryer.

Part numbers: DJF0032, DJF0032C & DJF0032CS Hand-operated foam soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304 0.8 mm thick, to be installed directly on the wall. Available in three finishes (white, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly. With a net weight of 1.25 Kg these soap dispensers have an inner plastic tank that prevents oxidation and that can be easily removed for cleaning and disinfection purposes. This entire range of soap dispensers is equipped with an anti-drip corrosion resistant valve that dispenses 1.0 ml of soap per service. This anti-drip valve is easily interchangeable with the valves of the other soap dispensers of the same line, so you can easily turn this liquid soap dispenser into a liquid or spray soap dispenser. In addition, these soap dispensers have a soap content level display in the front part that constantly indicates the level of soap available inside the soap dispenser. It is recommended to use foam soaps with a density between 0.95 and 1.05 kg/dm3.

Part numbers: PR2784C & PR2784CS Double standard roll toilet paper dispensers, 2 rolls capacity, made in stainless steel 0.8 mm thick, wall mounted, designed and manufactured by Mediclinics®, S.A. These models are designed to be used in restaurants, offices, hospitals, etc., presenting a suitable design for a simple bathroom integration. Body made in a single piece, these roll toilet paper dispensers are available in two different finishes: bright and satin. These roll toilet paper dispensers models have a functional, robust and trendy design that matches the new range of Mediclinics® bathroom accessories. This allows this roll toilet paper dispenser to blend into any space perfectly. In addition, these roll toilet paper dispensers have two level displays in both sides of the body that constantly indicates the level of the paper available and show when it is necessary to replace the paper roll. With a capacity of two standard rolls, these roll toilet paper dispenser models include an automatic mechanism, which causes the next roll to drop once the bottom roll has been used. It is a plastic bracket for the reserve paper roll that can be regulated in two different positions, depending on the dimensions of the paper roll and that allows the free movement of the roll in use. The paper roll drops when the previous has been consumed, through a simple manipulation by the level displays at the side.

Part numbers: BR0300C, BR0400C, BR0600C, BR0750C, BR0900C, BR1200C, BR0300CS, BR0400CS, BR0600CS, BR0750CS, BR0900CS & BR1200CS Grab bar manufactured by Mediclinics in stainless steel bar Ø 32 mm, 1,5 mm thickness and with a snap flange cover for hidden mounting. State of the art design, high durability and easy to maintain. The process used for bending the grab bars guarantees uniformity in the diameter of its curves. Built using AISI 304 stainless steel with a bright and satin finish. Stainless steel screws and plastic plugs to install the grab bar to the wall are provided.

Part numbers: M03A Mediflow® stainless steel hand dryer models are characterised by their power and ruggedness. Automatically operated compact solutions, which thanks to its two product options, are better suited for any type of washroom environment. Mediflow® Basic line are made according to the highest quality and safety standards. It includes a safety thermal limiter, automatic disconnect system, safety screws and special wrench type opener. The cover of these hand dryers is made in steel, 1.5 thick and available in white Epoxy finish.

Part numbers: DT2106C & DT2106CS Paper towel dispenser, designed and manufactured by Mediclinics, made in AISI 304 stainless steel 0.8 mm. thick, gright or satin finished. These dispensers are designed to be installed in any type of public washroom. Models for a more efficient use of the paper and suitable for different washroom environments: gymnasiums, sports centres, hospitals and health centres, hotels and similar type installations; solutions even for use in different places. Models suitable for C/Z folded paper towels; in this category, products are available that allow amounts ranging between 400 and 600 towels. All Mediclinics paper tower dispensers are supplied with a lock and special key for opening and screws. These dispensers are especially designed so that the paper can be easily replaced. Also, most models of this brand include anti-vandalism features and incorporate mechanisms to facilitate and optimize the use of paper.

Part numbers: M06A-UL & M06AB-UL The Speedflow® line of hand dryers is categorized within the eco-fast range of product. With a total power of 1150 W, it consumes an average of 3.83 W per drying cycle, which achieves an energy savings greater than 80% with respect to traditional hand dryers. about carbon foot print the Speedflow line consumes an average of 247 Kg of CO2, which represents a 51% annual reduction in emissions. Manually adjustable high speed motor that allows controlling the noise and the speed, which allows the hand dryer to adapt to any type of washroom environment. Heating element can be switch off by means of a jumper placed on the electronic control. Highly durable compact units with anti-vandalism features it is available steel and in two different types of finishes: white or black. Low noise pollution, with a noise level between 64 and 74 dBA. Air outlet speed between 56 and 110 mph, achieving a fast drying time between 10 and 12 seconds. Maximum drying safety with automatic disconnect after 60 seconds of continued use. In conclusion, Speedflow® is an eco-efficient hand dryer because minimizes energy consumption and CO2 emissions that is especially recommended for public washrooms with a high traffic of people; and thanks to its design and width (ultrathin), it is compliant with ADA/USA standards.

Part numbers: PP0006 The wall mounted sanitary napkin container with lid manufactured by Mediclinics has a capacity of 6 L and it is available in steel white Epoxy finished. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece. The lid protudes 3.5 mm from the body to facilitate the opening and it is fastened to the body by two shafts that they allows its rotation. It can be either free-standing or wall-mounted.

Part numbers: M03AC & M03ACS The MEDIFLOW® Series of hand dryers was designed & developed with ergonomic principles in mind, focusing on functionality, safety and anti-vandalism. These Serie boast the legendary SANFILOW airflow – over 315 CFM per hour plus fully automatic operation, precision design and efficiency, reducing the noise level to the minimum of the market on its category. The cover of these hand dryers is available in AISI 304 stainless steel bright finish or in AISI 304 stainless steel satin finish, it represents a stylish choice.

Part numbers: PR2783C & PR2783CS Stainless steel toilet roll paper dispenser Ø 230 mm, manufactured by Mediclinics in stainless steel AISI 304, 0.8 mm thick, to be installed directly on the wall. Mediclinics toilet paper dispensers provide a solution for heavy duty paper rolls. The product line is designed to equip any public washroom, offering different products that adapt to the different needs of the washroom that is to be equipped. These models are designed for high traffic washrooms that experience a large influx of people. The solutions provided by this category are available in two different finishes: bright AISI 304 stainless steel and satin AISI 304 stainless steel. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece and they have a Mediclinics standard safety lock with a key, which is provided with the product. Also, all of them incorporate a slot on the front of the model to allow viewing the amount of paper remaining and they have an AISI 304 stainless steel axis with inertia brake to optimize the dispensing of the paper.

Part numbers: M06AF-UL The Speedflow® line of hand dryers is categorized within the eco-fast range of product. With a total power of 1150 W, it consumes an average of 3.83 W per drying cycle, which achieves an energy savings greater than 80% with respect to traditional hand dryers. about carbon foot print the Speedflow line consumes an average of 247 Kg of CO2, which represents a 51% annual reduction in emissions. Manually adjustable high speed motor that allows controlling the noise and the speed, which allows the hand dryer to adapt to any type of washroom environment. Heating element can be switch off by means of a jumper placed on the electronic control. Highly durable compact units with anti-vandalism features it is available steel and in cast iron white enameled cover. Low noise pollution, with a noise level between 64 and 74 dBA. Air outlet speed between 56 and 110 mph, achieving a fast drying time between 10 and 12 seconds. Maximum drying safety with automatic disconnect after 60 seconds of continued use. In conclusion, Speedflow® is an eco-efficient hand dryer because minimizes energy consumption and CO2 emissions that is especially recommended for public washrooms with a high traffic of people; and thanks to its design and width (ultrathin), it is compliant with ADA/USA standards.

Part numbers: E88, E88B, E88C, E88CS & E88O Saniflow® push button operated hand dryers with steel cover is the rotating nozzle hand dryer that is most widely used in the world, regardless of the location to be fitted. These machines also feature easy maintenance, low noise levels and a high level of user safety. Together with an accurate design of components, SANIFLOW dryers boast the most powerful airflow in the world, which, combined with a comfortable drying temperature, reduces drying times to a minimum. Available in a 1,5 mm. thick steel cover white, black, bright chrome, satin chome or gold plated finished is ideal for Heavy traffic Bathrooms. Thus, these are proven models with a long durability and complete reliability, with anti-vandalism features and designed to be installed in high traffic of people such as airports, large hotels, sport centres, large recreational areas and large official organizations, among others.

Part numbers: BG0900CS Swing-up grab bar, 3 fixed positions with toilet paper roll holder hook, to install close to the toilet, manufactured by Mediclinics in aisi 304 stainless steel bar Ø 32 mm and 1,5 mm thick. Suitable for bathrooms specific for invalids, elderly people or the handicapped and to achieve barrier-free accessibility in bathrooms and public spaces. Model suitable for public use. Highest durability and rusting resistance thanks to its stainless steel AISI 304 manufacturing. The bending process guarantees the uniformity of the diameter along the bends. It incorporates a hook roller holder and a system to place the bar in 3 different positions. Steel mounting flange, 3 mm thick. Incorporates 6 countersunk screw holes of Ø6, 5 mm for mounting on the wall. Compatible with the installation of the Mediclinics’ grab bars BG0800… and BG0850…). Included screws for brick walls in stainless steel. The strength of the bar support will depend on the type of surface and the supports used. Block rubber at the end, to support the mounting plate. With optional kit to prevent electrical conductivity (KA0060).

Part numbers: DT0303 Mediclinics paper towel roll dispensers are designed to be installed in any type of public washrooms. They use paper towell rolls maximum diameter of 250 mm. These paper towel dispensers are made in steel white epoxy finished. They have been thought for a more efficient paper use and suitable for different washroom environments: gymnasiums, sports centers, hospitals and health centers, hotels and similar type of installations. All these models have a front sliding door, especially designed for an easy paper replacement. They have anti-vandal features and designed to facilitate and optimize the rational use of the paper, such as for example the toothed paper outlet that facilitates the paper cutting. These Mediclinics paper tower roll dispensers are supplied with a lock and special key for opening and screws for the installation to the wall.

Part numbers: M09A & M09AB The line of Machflow® steel sensor operated hand dryers provides important energy savings and an ultra-fast drying. Solutions with an avant-garde design and with two different finishes so that the dryers can easily blend in with the decoration. Its main advantages include: - energy savings (1.9 Watts per drying cycle) - ultra-fast drying time. Dries hands in record speed, between 8 and 12 seconds) - caring for the environment. The Machflow® family consumes an average of 237 Kg of CO2, which represents a 53% annual carbon print reduction) - minimum noise pollution (between 68 and 75 dB) The cover of this hand dryers is manufactured in steel, 1.5 mm thick and it is available in two finishes (white and black Epoxy). With a maximum air speed of 325 Km/h, the Machflow Mediclinics’ hand dryers stands out in the fast drying sector, while complying with the most important international quality and safety certifications; its anti-vandalism features make it suitable for use at facilities with a high traffic of people.

Part numbers: PR2787C & PR2787CS Toilet roll paper dispenser Ø 275 mm, manufactured by Mediclinics in stainless steel AISI 304, 0.8 mm thick, to be installed directly on the wall. Mediclinics toilet paper dispensers provide a solution for heavy duty paper rolls. The product line is designed to equip any public washroom, offering different products that adapt to the different needs of the washroom that is to be equipped. These models are designed for high traffic washrooms that experience a large influx of people. The solutions provided by this category are available in two different finishes: bright AISI 304 stainless steel and satin AISI 304 stainless steel. Highly resistant solutions for high traffic, with anti-vandalism features; the body is made of a solid piece and they have a Mediclinics standard safety lock with a key, which is provided with the product. Also, all of them incorporate a slot on the front of the model to allow viewing the amount of paper remaining and they have an AISI 304 stainless steel axis with inertia brake to optimize the dispensing of the paper.

Part numbers: M04A-120V, M04AC-120V & M04ACS-120V The economic line of Smartflow® hand dryers is one of the most compact in the market, designed for locations that because of their size require small sized washroom accessories that meet two requirements: low consumption and optimum hand drying. These units are automatic dryers that offer an optimum relationship between functionality and price. Because of its features and design, this economic line is intended to be installed in areas with a large trafic of people like for example medium sized restaurants, cafeterias or the offices of a small or medium sized company. Three models with different finishes are available: White, bright and satin. All of them with an ABS resistant cover and electronic detection sensor by infrared beam with adjustable distance detection, that allows a better adaptability to different types of washrooms. These dryers also provide maximum safety, with a safety thermal cut off installed in the motor and another one in the dryer’s heating element.

Part numbers: E88A-UL, E88AB-UL, E88AC-UL & E88ACS-UL SANIFLOW® AUTOMATIC hand dryers are premium quality heavy-duty dryers with excellent performance and life, provided with a ten years limited warranty. These machines also feature easy maintenance, low noise levels and a high level of user safety. Together with an accurate design of components, SANIFLOW dryers boast the most powerful airflow in the world, which, combined with a comfortable drying temperature, reduces drying times to a minimum. Available in steel cover white, black, bright, satin or gold finished. Ideal for Heavy traffic Bathrooms.

Part numbers: PR0789C & PR0789CS These models are designed and manufactured by Mediclinics in AISI 304 stainless steel 0.8 mm thick and they are available in two diferent types of finishes: bright and satin. They have been thought to be used in restaurants, offices, hospitals, etc. and provide value added to the design. All of these are capable of holding 3 standard toilet paper rolls or a Ø275mm industrial paper roll. The 3 standard toilet paper rolls option, includes an automatic mechanism, based in a revolvering mechanism, which causes the next roll to drop once the bottom roll has been used. Ø275mm industrial paper roll option has an axis with anti-spin brake by inertia, to ensure a more rational use of the paper. With anti-vandalism features, all of these include a special key for opening the casing.

Part number: M88APLUS-UL Mediclinics Juniorplus sensor operated hand dryers have been designed for those washroom environments that require an excellent value for money. Equipped with a one piece ABS resistant cover it has been designed for medium/small washrooms. Includes an electronic detection system that uses an infrared beam, which is an adjustable mechanism that allows better adaptability to different types of washrooms. These dryers are also characterised for offering an optimum relationship between performance and consumption; incorporating an induction motor that allows free maintenance. They are ideal to be installed in washrooms with an average traffic of people like for example, restaurants, theatres, offices, etc. These dryers also provide maximum safety, with a safety thermal cut off installed in the motor and another one in the dryer’s heating element.

Part numbers: E05 & E05B Saniflow® push button operated hand dryers with steel cover is the rotating nozzle hand dryer that is most widely used in the world, regardless of the location to be fitted. These machines also feature easy maintenance, low noise levels and a high level of user safety. Together with an accurate design of components, SANIFLOW dryers boast the most powerful airflow in the world, which, combined with a comfortable drying temperature, reduces drying times to a minimum. Available in a 1,5 mm. thick steel cover white or black finished is ideal for Heavy traffic Bathrooms. Thus, these are proven models with a long durability and complete reliability, with anti-vandalism features and designed to be installed in high traffic of people such as airports, large hotels, sport centres, large recreational areas and large official organizations, among others.

WALL SHELF / BEDSIDE TABLE A versatile member of the Manhattan family. Use it as a wall shelf or bedside table. The flexible and clean design will make the Manhattan Wall an essential part of your interior design. Manhattan Wall’s design is twofold, it reveals what’s inside yet keeps the content hidden. Available In white and anthracite.